TABLE A LAMP RANGE
Nato Stock Number 6240-99-995-0000
TABLE B LAMPS RANGE
Nato Stock Number 6240-99-996-0000
TABLE B (SHIP LIGHTING RANGE)
Nato Stock Number 6210-99-996-9228
LAMPS RANGE LIGHTING EQUIPMENT
Nato Stock Number 6230-111-0000
WELLGLASSES CLEAR IN EXCESS 4000 PLUS
Nato Stock Number 6210-99-764-8343
Wellglasses clear in excess 4000 plus. Special coloured glass has been used for many years in the lighting industry especially in well glasses. The coloured glass has been found to be expensive and requires volume quantities in production, however clear well glass of many types and applications are easily produced in mass volume. The Ronsil colouring system directly replaces coloured glass. The special high temperature silicone based material is internally applied to the inside of the clear well glass, creating an identically matched colour spectrum to that required by the military specification or any chromaticity colour co-ordinates. Typical of the products we can colour are wellglasses, bulkheads, railway signal lenses, marine and ship lighting, aircraft and airport runway lenses, road and traffic signal lenses, exterior light fittings, street and display lighting, laboratory glass, pavement lenses and wall blocks. Ronfell specialise in military admiralty / ruby red and any colour co-ordinates in the chromaticity spectrum. The Ronsil silicone ceramic material is used with coloured dyes to internally or externally spray, sheet glass or any shaped glass for the effect of colouring. The Ronsil “S” shattershield system is used to protect luminaire glass lenses or other glass lenses from shattering during impact. The Ronsil “S” provides a high temperature membrane over the luminaire and in the event captures and holds together the lenses preventing large glass pieces or thin glass shards escaping. The level of protection is derived from the number of coatings applied, however IK6 or IK7 impact levels and containment are in general use. The Ronsil “S” coatings has typically an 8% reduction on light output with no colour distortion. The maximum temperature in operational use from ambient is 120 Deg Celsius. A damp soapy water cloth achieves cleaning the internal or external lens.
WELLGLASSES RUBY RED IN EXCESS 3000 PLUS
Nato Stock Number 6210-99-764-8344
Wellglasses Ruby Red in excess 3000 plus. Special coloured glass has been used for many years in the lighting industry especially in well glasses. The coloured glass has been found to be expensive and requires volume quantities in production, however clear well glass of many types and applications are easily produced in mass volume.
The Ronsil colouring system directly replaces coloured glass. The special high temperature silicone based material is internally applied to the inside of the clear well glass, creating an identically matched colour spectrum to that required by the military specification or any chromaticity colour co-ordinates. Typical of the products we can colour are wellglasses, bulkheads, railway signal lenses, marine and ship lighting, aircraft and airport runway lenses, road and traffic signal lenses, exterior light fittings, street and display lighting, laboratory glass, pavement lenses and wall blocks. Ronfell specialise in military admiralty / ruby red and any colour co-ordinates in the chromaticity spectrum. The Ronsil silicone ceramic material is used with coloured dyes to internally or externally spray, sheet glass or any shaped glass for the effect of colouring.
The Ronsil “S” shattershield system is used to protect luminaire glass lenses or other glass lenses from shattering during impact. The Ronsil “S” provides a high temperature membrane over the luminaire and in the event captures and holds together the lenses preventing large glass pieces or thin glass shards escaping. The level of protection is derived from the number of coatings applied, however IK6 or IK7 impact levels and containment are in general use. The Ronsil “S” coatings has typically an 8% reduction on light output with no colour distortion. The maximum temperature in operational use from ambient is 120 Deg Celsius. A damp soapy water cloth achieves cleaning the internal or external lens.
WELLGLASSES AMBER IN EXCESS 2000 PLUS
Nato Stock Number 6210-99-764-8346
Wellglasses Amber in excess 2000 plus. Special coloured glass has been used for many years in the lighting industry especially in well glasses. The coloured glass has been found to be expensive and requires volume quantities in production, however clear well glass of many types and applications are easily produced in mass volume.
The Ronsil colouring system directly replaces coloured glass. The special high temperature silicone based material is internally applied to the inside of the clear well glass, creating an identically matched colour spectrum to that required by the military specification or any chromaticity colour co-ordinates. Typical of the products we can colour are wellglasses, bulkheads, railway signal lenses, marine and ship lighting, aircraft and airport runway lenses, road and traffic signal lenses, exterior light fittings, street and display lighting, laboratory glass, pavement lenses and wall blocks.
Ronfell specialise in military admiralty / ruby red and any colour co-ordinates in the chromaticity spectrum. The Ronsil silicone ceramic material is used with coloured dyes to internally or externally spray, sheet glass or any shaped glass for the effect of colouring. The Ronsil “S” shattershield system is used to protect luminaire glass lenses or other glass lenses from shattering during impact. The Ronsil “S” provides a high temperature membrane over the luminaire and in the event captures and holds together the lenses preventing large glass pieces or thin glass shards escaping.
The level of protection is derived from the number of coatings applied, however IK6 or IK7 impact levels and containment are in general use. The Ronsil “S” coatings has typically an 8% reduction on light output with no colour distortion. The maximum temperature in operational use from ambient is 120 Deg Celsius. A damp soapy water cloth achieves cleaning the internal or external lens.
WELLGLASSES GREEN IN EXCESS 3000 PLUS
Nato Stock Number 6210-99-764-8345
Wellglasses Green in excess 3000 plus. Special coloured glass has been used for many years in the lighting industry especially in well glasses. The coloured glass has been found to be expensive and requires volume quantities in production, however clear well glass of many types and applications are easily produced in mass volume.
The Ronsil colouring system directly replaces coloured glass. The special high temperature silicone based material is internally applied to the inside of the clear well glass, creating an identically matched colour spectrum to that required by the military specification or any chromaticity colour co-ordinates. Typical of the products we can colour are wellglasses, bulkheads, railway signal lenses, marine and ship lighting, aircraft and airport runway lenses, road and traffic signal lenses, exterior light fittings, street and display lighting, laboratory glass, pavement lenses and wall blocks.
Ronfell specialise in military admiralty / ruby red and any colour co-ordinates in the chromaticity spectrum. The Ronsil silicone ceramic material is used with coloured dyes to internally or externally spray, sheet glass or any shaped glass for the effect of colouring. The Ronsil “S” shattershield system is used to protect luminaire glass lenses or other glass lenses from shattering during impact. The Ronsil “S” provides a high temperature membrane over the luminaire and in the event captures and holds together the lenses preventing large glass pieces or thin glass shards escaping.
The level of protection is derived from the number of coatings applied, however IK6 or IK7 impact levels and containment are in general use. The Ronsil “S” coatings has typically an 8% reduction on light output with no colour distortion. The maximum temperature in operational use from ambient is 120 Deg Celsius. A damp soapy water cloth achieves cleaning the internal or external lens.
WELLGLASSES IN EXCESS 2000 PLUS
Nato Stock Number 6210-99-764-8000
LED RANGE LIGHT EMITTING DIODES
Nato Stock Number 5961-99-726-0000
LED RANGE LIGHT EMITTING DIODES
Nato Stock Number 5980-99-802-0000
LED RANGE DISCRETE LIGHT EMITTING DIODES
Nato Stock Number 5989-99-802-4559
LED Range Discrete Light Emitting Diodes
LED RANGE PCB MOUNTING LIGHT EMITTING DIODES
Nato Stock Number 5980-99-495-7411
LED Range PCB Mounting Light Emitting Diodes
LED RANGE INCANDESCENT REPLACEMENT LIGHT EMITTING DIODES
Nato Stock Number 5961-99-660-0630
LED Range Incandescent Replacement Light Emitting Diodes
LED RANGE BODIED ACETAL PANEL LIGHT EMITTING DIODES
Nato Stock Number 5961-99-797-3642
LED Range Bodied Acetal Panel Light Emitting Diodes
LED RANGE MOUNTING HARDWARE LIGHT EMITTING DIODES
Nato Stock Numbers 5961-99-780-3939
LED Range Mounting Hardware Light Emitting Diodes
LED RANGE PROFESSIONAL SEALED PANEL LIGHT EMITTING DIODES
Nato Stock Number 5980-99-831-4454
LED Range Professional Sealed Panel Light Emitting Diodes
LED RANGE SPECIAL LIGHT EMITTING DIODES
Nato Stock Number 5980-99-721-3958
LED Range Special Light Emitting Diodes
PROFESSIONAL SEALED LED, MOUNTING HARDWARE
Nato Stock Number5961-99-741-7038
If you require further details or would like to place an order. Please contact our sales team directly on Tel: 01257 795186 | Email: sales@modlamps.co.uk