R-NATO STOCK NUMBERS

TABLE A LAMP RANGE

Nato Stock Number 6240-99-995-0000

Table-A-6240-99-995-1-11V

TableA-6240-99-995-12V

TableA-6240-99-995-14-24V

TableA-6240-99-995-25-50V

TABLE B LAMPS RANGE

Nato Stock Number 6240-99-996-0000

Table-B-6240-99-996-60-260V

Table_C_6240_99_996_Flt_Tubes

Table_D_6240_99_996

Table_E_6240_99_996

TABLE B (SHIP LIGHTING RANGE)

Nato Stock Number 6210-99-996-9228

TableLB-6210-99-996-9228

LAMPS RANGE LIGHTING EQUIPMENT

Nato Stock Number 6230-111-0000

TableLP-6230-00-111-0000

WELLGLASSES CLEAR IN EXCESS 4000 PLUS

Nato Stock Number 6210-99-764-8343

Wellglasses clear in excess 4000 plus. Special coloured glass has been used for many years in the lighting industry especially in well glasses. The coloured glass has been found to be expensive and requires volume quantities in production, however clear well glass of many types and applications are easily produced in mass volume. The Ronsil colouring system directly replaces coloured glass. The special high temperature silicone based material is internally applied to the inside of the clear well glass, creating an identically matched colour spectrum to that required by the military specification or any chromaticity colour co-ordinates. Typical of the products we can colour are wellglasses, bulkheads, railway signal lenses, marine and ship lighting, aircraft and airport runway lenses, road and traffic signal lenses, exterior light fittings, street and display lighting, laboratory glass, pavement lenses and wall blocks. Ronfell specialise in military admiralty / ruby red and any colour co-ordinates in the chromaticity spectrum. The Ronsil silicone ceramic material is used with coloured dyes to internally or externally spray, sheet glass or any shaped glass for the effect of colouring. The Ronsil “S” shattershield system is used to protect luminaire glass lenses or other glass lenses from shattering during impact. The Ronsil “S” provides a high temperature membrane over the luminaire and in the event captures and holds together the lenses preventing large glass pieces or thin glass shards escaping. The level of protection is derived from the number of coatings applied, however IK6 or IK7 impact levels and containment are in general use. The Ronsil “S” coatings has typically an 8% reduction on light output with no colour distortion. The maximum temperature in operational use from ambient is 120 Deg Celsius. A damp soapy water cloth achieves cleaning the internal or external lens.

WELLGLASSES RUBY RED IN EXCESS 3000 PLUS

Nato Stock Number 6210-99-764-8344

Wellglasses Ruby Red in excess 3000 plus. Special coloured glass has been used for many years in the lighting industry especially in well glasses. The coloured glass has been found to be expensive and requires volume quantities in production, however clear well glass of many types and applications are easily produced in mass volume.

The Ronsil colouring system directly replaces coloured glass. The special high temperature silicone based material is internally applied to the inside of the clear well glass, creating an identically matched colour spectrum to that required by the military specification or any chromaticity colour co-ordinates. Typical of the products we can colour are wellglasses, bulkheads, railway signal lenses, marine and ship lighting, aircraft and airport runway lenses, road and traffic signal lenses, exterior light fittings, street and display lighting, laboratory glass, pavement lenses and wall blocks. Ronfell specialise in military admiralty / ruby red and any colour co-ordinates in the chromaticity spectrum. The Ronsil silicone ceramic material is used with coloured dyes to internally or externally spray, sheet glass or any shaped glass for the effect of colouring.

The Ronsil “S” shattershield system is used to protect luminaire glass lenses or other glass lenses from shattering during impact. The Ronsil “S” provides a high temperature membrane over the luminaire and in the event captures and holds together the lenses preventing large glass pieces or thin glass shards escaping. The level of protection is derived from the number of coatings applied, however IK6 or IK7 impact levels and containment are in general use. The Ronsil “S” coatings has typically an 8% reduction on light output with no colour distortion. The maximum temperature in operational use from ambient is 120 Deg Celsius. A damp soapy water cloth achieves cleaning the internal or external lens.

WELLGLASSES AMBER IN EXCESS 2000 PLUS

Nato Stock Number 6210-99-764-8346

Wellglasses Amber in excess 2000 plus. Special coloured glass has been used for many years in the lighting industry especially in well glasses. The coloured glass has been found to be expensive and requires volume quantities in production, however clear well glass of many types and applications are easily produced in mass volume.

The Ronsil colouring system directly replaces coloured glass. The special high temperature silicone based material is internally applied to the inside of the clear well glass, creating an identically matched colour spectrum to that required by the military specification or any chromaticity colour co-ordinates. Typical of the products we can colour are wellglasses, bulkheads, railway signal lenses, marine and ship lighting, aircraft and airport runway lenses, road and traffic signal lenses, exterior light fittings, street and display lighting, laboratory glass, pavement lenses and wall blocks.

Ronfell specialise in military admiralty / ruby red and any colour co-ordinates in the chromaticity spectrum. The Ronsil silicone ceramic material is used with coloured dyes to internally or externally spray, sheet glass or any shaped glass for the effect of colouring. The Ronsil “S” shattershield system is used to protect luminaire glass lenses or other glass lenses from shattering during impact. The Ronsil “S” provides a high temperature membrane over the luminaire and in the event captures and holds together the lenses preventing large glass pieces or thin glass shards escaping.

The level of protection is derived from the number of coatings applied, however IK6 or IK7 impact levels and containment are in general use. The Ronsil “S” coatings has typically an 8% reduction on light output with no colour distortion. The maximum temperature in operational use from ambient is 120 Deg Celsius. A damp soapy water cloth achieves cleaning the internal or external lens.

WELLGLASSES GREEN IN EXCESS 3000 PLUS

Nato Stock Number 6210-99-764-8345

Wellglasses Green in excess 3000 plus. Special coloured glass has been used for many years in the lighting industry especially in well glasses. The coloured glass has been found to be expensive and requires volume quantities in production, however clear well glass of many types and applications are easily produced in mass volume.

The Ronsil colouring system directly replaces coloured glass. The special high temperature silicone based material is internally applied to the inside of the clear well glass, creating an identically matched colour spectrum to that required by the military specification or any chromaticity colour co-ordinates. Typical of the products we can colour are wellglasses, bulkheads, railway signal lenses, marine and ship lighting, aircraft and airport runway lenses, road and traffic signal lenses, exterior light fittings, street and display lighting, laboratory glass, pavement lenses and wall blocks.

Ronfell specialise in military admiralty / ruby red and any colour co-ordinates in the chromaticity spectrum. The Ronsil silicone ceramic material is used with coloured dyes to internally or externally spray, sheet glass or any shaped glass for the effect of colouring. The Ronsil “S” shattershield system is used to protect luminaire glass lenses or other glass lenses from shattering during impact. The Ronsil “S” provides a high temperature membrane over the luminaire and in the event captures and holds together the lenses preventing large glass pieces or thin glass shards escaping.

The level of protection is derived from the number of coatings applied, however IK6 or IK7 impact levels and containment are in general use. The Ronsil “S” coatings has typically an 8% reduction on light output with no colour distortion. The maximum temperature in operational use from ambient is 120 Deg Celsius. A damp soapy water cloth achieves cleaning the internal or external lens.

WELLGLASSES IN EXCESS 2000 PLUS

Nato Stock Number 6210-99-764-8000

LED RANGE LIGHT EMITTING DIODES

Nato Stock Number 5961-99-726-0000

TableLX2-5961-99-805-4013

LED RANGE LIGHT EMITTING DIODES

Nato Stock Number 5980-99-802-0000

TableLX1-5980-99-990-8383

LED RANGE DISCRETE LIGHT EMITTING DIODES

Nato Stock Number 5989-99-802-4559

LED Range Discrete Light Emitting Diodes

LED RANGE PCB MOUNTING LIGHT EMITTING DIODES

Nato Stock Number 5980-99-495-7411

LED Range PCB Mounting Light Emitting Diodes

LED RANGE INCANDESCENT REPLACEMENT LIGHT EMITTING DIODES

Nato Stock Number 5961-99-660-0630

LED Range Incandescent Replacement Light Emitting Diodes

LED RANGE BODIED ACETAL PANEL LIGHT EMITTING DIODES

Nato Stock Number 5961-99-797-3642

LED Range Bodied Acetal Panel Light Emitting Diodes

LED RANGE MOUNTING HARDWARE LIGHT EMITTING DIODES

Nato Stock Numbers 5961-99-780-3939

LED Range Mounting Hardware Light Emitting Diodes

LED RANGE PROFESSIONAL SEALED PANEL LIGHT EMITTING DIODES

Nato Stock Number 5980-99-831-4454

LED Range Professional Sealed Panel Light Emitting Diodes

LED RANGE SPECIAL LIGHT EMITTING DIODES

Nato Stock Number 5980-99-721-3958

LED Range Special Light Emitting Diodes

PROFESSIONAL SEALED LED, MOUNTING HARDWARE

 

If you require further details or would like to place an order. Please contact our sales team directly on Tel: 01257 795186 | Email: sales@modlamps.co.uk